Mechanical Presses

The technology of IDS is the technology of the world in the result


ICS

Machine features

  • It is suitable for blanking, progressive and drawing processing.
  • Maintaining high rigidity and high accuracy by optimal design.
  • Advantageous to use a large and big mold by adopting four sides guide method.
  • Excellent in durability and maintenance by using wet clutch brake.
  • Automatic circulation oiling that supplies oil every moving part of the press.
  • Uses Hydraulic overload protector with superior performance and easy adjustment.
  • Improvement of efficiency in equipment usage by Compact electrical control.
  • Model : ICS-35,60,80,110,160,200,250,300TON

Standard Accessories (* : option)

  • photo electric safety device
  • rotary cam switch / encoder
  • continuous stop function
  • automatic lubrication device
  • air ejector
  • overrun detective device
  • crank angle indicator
  • electromotive slide adjustment device
  • slide adjustment counter
  • stepless speed change device
  • overload protector
  • die cushion *
  • knockout device *
  • Q.D.C system *
  • motor change over switch *

※ We accept an order special specification.

※ We after the specification for the purpose of imprevement.


ICSL

Machine features

  • Realizing reliable mechanism by using a link installed inside the driving gear adopted by our company.
  • Excellent in fast response and maintenance with flywheel embedded pneumatic operating wet clutch brake.
  • Advantageous to use a large and big mold by adopting four sides guide method.
  • Realizing low noise and high-rigidity by Gear Drive System operating in oil.
  • Suitable for molding such as drawing products by motion to maximize the time to stay in the bottom dead point
  • Minimizing the damage of mold by optimizing the motion of the molding parts and non-molding parts.
  • Model : ICSL-110,160,200,250,300TON

Standard Accessories (* : option)

  • photo electric safety device
  • rotary cam switch / encoder
  • continuous stop function
  • automatic lubrication device
  • air ejector
  • overrun detective device
  • crank angle indicator
  • electromotive slide adjustment device
  • slide adjustment counter
  • stepless speed change device
  • overload protector
  • die cushion *
  • knockout device *
  • Q.D.C system *
  • motor change over switch *

※ We accept an order special specification.

※ We after the specification for the purpose of imprevement.




C.G. of Slide movement / Link Structure

C.G. of Slide movement
Link Structure



Outside view(ICS/ICSL)

C-Frame video




Read more ....





Machine features

  • C-double crank type is a complement to a narrow working area of the single-type.
  • Improving dynamic precision by eliminating the eccentric load.
  • Advantage to productions of progressive mold.
  • Advantage to growth of production and cost reduction.
  • Advantage to progressive and transfer work with a large slide and bolster area.
  • Adopting Zero-Thrust driven method which is a strong in the eccentric load.
  • Model : ICD-110,160,200,250,300TON




Standard Accessories (* : option)

  • photo electric safety device
  • rotary cam switch / encoder
  • continuous stop function
  • automatic lubrication device
  • air ejector
  • overrun detective device
  • crank angle indicator
  • electromotive slide adjustment device
  • slide adjustment counter
  • stepless speed change device
  • overload protector
  • die cushion *
  • knockout device *
  • Q.D.C system *
  • motor change over switch *



Outside view(ICS/ICSL)

IH1




Machine features

  • Dynamic precision is improved since the phenomenon of front spread occurred in processing in C type press is fundamentally solved.
  • Suitable structural design for blanking, piercing and stamping processing.
  • Realizing low noise and high-rigidity by Gear Drive System operating in oil.
  • Improvement of precision by using widely supported 6 side gib.
  • Compact installation space with the optimized design.
  • Model : IH1-110,160,200,250,300,350,400TON



IHL1




Machine features

  • Dynamic precision is improved since the phenomenon of front spread occurred in processing in C type press is fundamentally solved.
  • Suitable structural design for blanking, piercing and stamping processing.
  • Realizing low noise and high-rigidity by Gear Drive System operating in oil.
  • Improvement of precision by using widely supported 6 side gib.
  • Compact installation space with the optimized design.
  • Model : IH1-110,160,200,250,300,350,400TON



Outside view(IH1/IHL1)

Read more ....

IH2




Machine features

  • Dynamic precision is improved since the phenomenon of front spread occurred in processing in C type press is fundamentally solved.
  • Suitable structural design for blanking, piercing and stamping processing.
  • Realizing low noise and high-rigidity by Gear Drive System operating in oil.
  • Improvement of precision by using widely supported 6 side gib.
  • Compact installation space with the optimized design.
  • Model : IH2-200,250,300,350,400,500,600,800TON




Standard Accessories (* : option)

  • photo electric safety device
  • rotary cam switch / encoder
  • continuous stop function
  • automatic lubrication device
  • air ejector
  • overrun detective device
  • crank angle indicator
  • electromotive slide adjustment device
  • slide adjustment counter
  • stepless speed change device
  • overload protector
  • die cushion *
  • knockout device *
  • Q.D.C system *
  • motor change over switch *



IHL2




Machine features

  • Dynamic precision is improved since the phenomenon of front spread occurred in processing in C type press is fundamentally solved.
  • Suitable structural design for blanking, piercing and stamping processing.
  • Advantage to a continuous molding operation by securing a large work space.
  • Realizing reliable mechanism by using a link installed inside the driving gear adopted by our company.
  • Excellent in fast response and maintenance with flywheel embedded pneumatic operating wet clutch brake.
  • Minimizing the damage of mold by optimizing the motion of the molding parts and non-molding parts
  • Model : IHL2-200,250,300,350,400,500,600,800TON




Standard Accessories (* : option)

  • photo electric safety device
  • rotary cam switch / encoder
  • continuous stop function
  • automatic lubrication device
  • air ejector
  • overrun detective device
  • crank angle indicator
  • electromotive slide adjustment device
  • slide adjustment counter
  • stepless speed change device
  • overload protector
  • die cushion *
  • knockout device *
  • Q.D.C system *
  • motor change over switch *



Outside view(IH2/IHL2)

Read more ....
IC1


Machine features

  • Securing a large work space with a powerful frame of 2 point straight side type (H).
  • Widely using such as blanking, drawing, piercing and etc by high torque.
  • maintaining a stable precision of 6-sides guide method.
  • Enhancing automation equipment and the productivity.
  • Suitable for a wide range of sheet metal working as large strokes.
  • Applied high torsional strength with Eccentric Gear and adequate deep drawing model.
  • Remove thrust load at driving operation and excellence of lubrication ability by the adoption of plunger guide.
  • In case of occurrence for the disorder of lubrication points, the adoption of centralized automatic re-circulating lubrication system which is stopped immediately.
  • Model : IC1-200,300,400,500,600,800,1000,1200TON
Read more ....



Standard Accessories (* : option)

  • photo electric safety device
  • rotary cam switch / encoder
  • continuous stop function
  • automatic lubrication device
  • air ejector
  • overrun detective device
  • crank angle indicator
  • electromotive slide adjustment device
  • touch panel operation monitor
  • slide adjustment counter
  • stepless speed change device
  • safety block
  • motor change over switch *
  • overload protector
  • die cushion *
  • knockout device *
  • Q.D.C system *



※ We accept an order special specification.

※ We after the specification for the purpose of imprevement.

IC2


Machine features

  • No variations in load with a powerful frame of 2 point straight side type (H).
  • Suitable for Widely using such as blanking, drawing by maintaining a high precision of 6-sides guide method.
  • Suitable structural design for blanking, piercing, stamping, transfer and progressive processing.
  • Advantage to a continuous molding operation by securing a large work space.
  • Realizing low noise and high-rigidity by Gear Drive System operating in oil.
  • Improvement of precision by using widely supported 6 side gib.
  • Compact installation space with the optimized design.
  • Model : ICL1-200,300,400,500,600,800TON
Read more ....



IC2


Machine features

  • Securing a large work space with a powerful frame of 2 point straight side type (H).
  • Widely using such as blanking, drawing, piercing and etc by high torque.
  • maintaining a stable precision of 6-sides guide method.
  • Enhancing automation equipment and the productivity.
  • Suitable for a wide range of sheet metal working as large strokes.
  • Applied high torsional strength with Eccentric Gear and adequate deep drawing model.
  • Remove thrust load at driving operation and excellence of lubrication ability by the adoption of plunger guide.
  • In case of occurrence for the disorder of lubrication points, the adoption of centralized automatic re-circulating lubrication system which is stopped immediately.
  • Model : IC2-200,300,400,500,600,800,1000,1200TON
Read more ....



Standard Accessories (* : option)

  • photo electric safety device
  • rotary cam switch / encoder
  • continuous stop function
  • automatic lubrication device
  • air ejector
  • overrun detective device
  • crank angle indicator
  • electromotive slide adjustment device
  • touch panel operation monitor
  • slide adjustment counter
  • stepless speed change device
  • safety block
  • motor change over switch *
  • overload protector
  • die cushion *
  • knockout device *
  • Q.D.C system *



※ We accept an order special specification.

※ We after the specification for the purpose of imprevement.

ICL2


Machine features

  • No variations in load with a powerful frame of 2 point straight side type (H).
  • Suitable for Widely using such as blanking, drawing by maintaining a high precision of 6-sides guide method.
  • Suitable structural design for blanking, piercing, stamping, transfer and progressive processing.
  • Advantage to a continuous molding operation by securing a large work space.
  • Realizing low noise and high-rigidity by Gear Drive System operating in oil.
  • Improvement of precision by using widely supported 6 side gib.
  • Compact installation space with the optimized design.
  • Model : ICL2-200,300,400,500,600,800TON



Standard Accessories (* : option)

  • photo electric safety device
  • rotary cam switch / encoder
  • continuous stop function
  • automatic lubrication device
  • air ejector
  • overrun detective device
  • crank angle indicator
  • electromotive slide adjustment device
  • touch panel operation monitor
  • slide adjustment counter
  • stepless speed change device
  • safety block
  • motor change over switch *
  • overload protector
  • die cushion *
  • knockout device *
  • Q.D.C system *



※ We accept an order special specification.

※ We after the specification for the purpose of imprevement.

C.G. of Slide movement / Link Structure

Blanking
Drawing
Read more ....
IE1


Machine features

  • Securing a large work space with a powerful frame of 2 point straight side type (H).
  • Widely using such as blanking, drawing, piercing and etc by high torque.
  • Maintaining a stable precision of 4-sides guide method.
  • Enhancing automation equipment and the productivity.
  • Suitable for a wide range of sheet metal working as large strokes.
  • Applied high torsional strength with Eccentric Gear and adequate deep drawing model.
  • Remove thrust load at driving operation and excellence of lubrication ability by the adoption of plunger guide.
  • In case of occurrence for the disorder of lubrication points, the adoption of centralized automatic re-circulating lubrication system which is stopped immediately.
  • High reliability of insert Wet Type Clutch/Brake ensures Forging and excellence in maintenance.
  • Model : IE1-300,400,500,600,800TON
Read more ....



Standard Accessories (* : option)

  • photo electric safety device
  • rotary cam switch / encoder
  • continuous stop function
  • automatic lubrication device
  • air ejector
  • overrun detective device
  • crank angle indicator
  • electromotive slide adjustment device
  • touch panel operation monitor
  • slide adjustment counter
  • stepless speed change device
  • safety block
  • motor change over switch *
  • overload protector
  • die cushion *
  • knockout device *
  • Q.D.C system *



※ We accept an order special specification.

※ We after the specification for the purpose of imprevement.

IEL1


Machine features

  • Securing a large work space with a powerful frame of 2 point straight side type (H).
  • Widely using such as blanking, drawing, piercing and etc by high torque.
  • Maintaining a stable precision of 6-sides guide method.
  • Enhancing automation equipment and the productivity.
  • Suitable structural design for stamping and drawing processing.
  • Advantage to a continuous molding operation by securing a large work space.
  • Realizing reliable mechanism by using a link installed inside the driving gear adopted by our company.
  • Excellent in fast response and maintenance with flywheel embedded pneumatic operating wet clutch brake.
  • Realizing low noise and high-rigidity by Gear Drive System operating in oil.
  • Suitable for molding such as drawing products by motion to maximize the time to stay in the bottom dead point.
  • Minimizing the damage of mold by optimizing the motion of the molding parts and non-molding parts.
  • Model : IEL1-300,400,500,600,800,1000,1200TON



IE2


Machine features

  • Securing a large work space with a powerful frame of 2 point straight side type (H).
  • Widely using such as blanking, drawing, piercing and etc by high torque.
  • Maintaining a stable precision of 4-sides guide method.
  • Enhancing automation equipment and the productivity.
  • Suitable for a wide range of sheet metal working as large strokes.
  • Applied high torsional strength with Eccentric Gear and adequate deep drawing model.
  • Remove thrust load at driving operation and excellence of lubrication ability by the adoption of plunger guide.
  • In case of occurrence for the disorder of lubrication points, the adoption of centralized automatic re-circulating lubrication system which is stopped immediately.
  • High reliability of insert Wet Type Clutch/Brake ensures Forging and excellence in maintenance.
  • Model : IE2-300,400,500,600,800,1000,1200TON
Read more ....



IEL2


Machine features

  • Securing a large work space with a powerful frame of 2 point straight side type (H).
  • Widely using such as blanking, drawing, piercing and etc by high torque.
  • Maintaining a stable precision of 4-sides guide method.
  • Enhancing automation equipment and the productivity.
  • Suitable for a wide range of sheet metal working as large strokes.
  • Applied high torsional strength with Eccentric Gear and adequate deep drawing model.
  • Remove thrust load at driving operation and excellence of lubrication ability by the adoption of plunger guide.
  • In case of occurrence for the disorder of lubrication points, the adoption of centralized automatic re-circulating lubrication system which is stopped immediately.
  • High reliability of insert Wet Type Clutch/Brake ensures Forging and excellence in maintenance.
  • Model : IE2-300,400,500,600,800,1000,1200TON



IEL4


Machine features

  • Securing a large work space with a powerful frame of 2 point straight side type (H).
  • Widely using such as blanking, drawing, piercing and etc by high torque.
  • Maintaining a stable precision of 6-sides guide method.
  • Enhancing automation equipment and the productivity.
  • Suitable structural design for stamping and drawing processing.
  • Advantage to a continuous molding operation by securing a large work space.
  • Realizing reliable mechanism by using a link installed inside the driving gear adopted by our company.
  • Excellent in fast response and maintenance with flywheel embedded pneumatic operating wet clutch brake.
  • Realizing low noise and high-rigidity by Gear Drive System operating in oil.
  • Suitable for molding such as drawing products by motion to maximize the time to stay in the bottom dead point.
  • Minimizing the damage of mold by optimizing the motion of the molding parts and non-molding parts.
  • Model : IEL4-300,400,500,600,800,1000,1200TON
Read more ....